Search results
M5 or M3 Slim Pre-Assembly T Nut for 2020 Aluminum Profile
M5 or M3 Slim Economy Pre-Assembly T Nut Material: Zinc plated carbon steel Thread Size: M5 Suitable for Openbuilds V-Slot, 80/20 20 Series, Openbuilds C-Beam, T Slot, Misumi HFS5 Series OR China Made 2020 Aluminum Extrusion Profiles ,etc. Package List: 100 x M5 Slim Pre-Assembly T Nut...
Robocults integrated stepper motor with driver
Integrated Stepper Motor with Driver Nema17 Integrated Stepper Motor 12 to 32 VDC Voltage Input 0.4A to 2A per phase support Full/Half/Quarter/16/32/64/128 microstep Idle current setting 0 to full load ajustable Common cathode, common anode, differential, one clock pulse/direction, double pulse CW/C...
900M welding iron tip for 936, 937 or 907 soldering station
900M Soldering Iron Tips If you need other model number which is not listed, please leave us message when ordering. Life: 5-15K solder joints longer than ordinary soldering iron Use: All 936 electric soldering iron Note: The larger the tip, the greater the heat capacity, the smaller the tip, the sma...
Alu handwheel with 200 reading label
Hand wheel for ball screw linear module Material: aluminum Diameter: 63.5mm Bore: 10mm 200 reading label per revolution simulation for full step mode stepper motor To position using manual control method by handwheel on CNC machines.
Robocults ball screw n smooth rod linear module
Ball screw and smooth rod drive linear module Nema17 48mm or Nema23 56mm stepper motor 1204 or 1605 ball screw 2080 80mm wide aluminum profile base plate 12mm smooth rod or linear shaft DUAL Ball screw nut carriage, rigid coupling To build a Modular 3D Printer or CNC Router. New arrival width 90mm w...
Low profile 2GT Pulley 60, 72, 120 tooth for 9mm belt
2GT Pulley for 9mm wide GT2 Belt Tooth profile: GT2 Pitch: 2mm Tooth number: 60 or 72 Bore diameter: 5mm, 6.35mm or 8mm Material: aluminum, the flange is zinc-plated steel. 65, 70, 80, 90, 100, and 110 tooth 2mm pitch 2GT pulleys are available upon request....
Low profile 2GT 30, 32, 36, 40 tooth pulley for 9mm wide belt
2GT Pulley for 9mm wide GT2 Belt Tooth profile: GT2 Pitch: 2mm Tooth number: 30, 32, 36 or 40 Bore diameter: 5mm, 6.35mm or 8mm Material: aluminum, flange is zinc plated steel....
Digital Display Hot Air Desoldering SMD Rework Station
Hot Air SMD Desoldering Rework Station Imported heating core, used in the electronics industry, anti-only cooling system, electrostatic design, Built-in Hall sensor, turbine principle, strong wind Advantage: Using the sensor closed loop temperature control, heating up quickly, set temperature is con...
42HS nema17 0.5N.m or 0.6N.m stepper motor
0.5N.m or 0.6N.m Nema17 Stepper Motor Nema17 42HS48-2504, 42HS60-1704 Step angle: 1.8 degree, 200 steps Body length: 48mm, 60mm Rated current: 42HS48 2.5A, 42HS60 1.7A per phase Holding torque: 42HS48-2804 0.5N.m, 42HS60-1704 0.6N.m Lead wire: 700mm with XH4P connector Wiring diagram: Black n Green,...
Injection Molding Machine Screw and Barrel
Injection Molding Machine Screw and Barrel Specification: Injection amount: 30g-50000g Screw diameter: Ф18-Ф250 type Clamping force: 250KN-32000KN Material: 38crMoAIA, quenched and tempered. Qualitative. Nitriding, surface Hardness: HV ≥ 900 Nitriding depth: 0.5-0.8mm Features: Material special stai...
Injection screw customize service
Injection machine screw and barrel PVC injection molding machine screw Injection amount: 30g(range 30g-50000g) Screw diameter: Ф18-Ф250 type Clamping force: 250KN-32000KN Material: 38crMoAIA, quenched and tempered. Qualitative. Nitriding, surface Features: Material special stainless steel, quenching...
Extruder screw customize service
Extruder machine screw and barrel This extruder screw diameter 16mm or 20mm is an exaple for extruding plastic for lab or school. Customised is welcomed. Extruder screw is the field of polymer processing. Following questions will be needed. 1, what material of plastic you will apply? This will detem...
HGR15, HGR20, HGR25, HGR30 Linear Rail or matching Carriage
Heavy duty size 15, 20, 25 or 30 square linear rail, carriage China Made, material S55C hardened steel, rusty oil protected Size 15mm or 20mm square heavy duty for Gantry CNC Mill or Router The price listed are separate for linear rail and carriage HGR15 1000mm rail 27USD, HGR20 1000mm rail 28USD HG...
6 Axis 200KHz Ethernet Mach3 CNC Controller
200KHz Ethernet Mach3 Card 6 Aixs Motion Controller 12 ports photoelectric isolated input interface for ordinary digital data 10 ports photoelectric isolated output interface for ordinary digital data 1 port 0-10V spindle speed analog output interface(can change to PWM output) Can support 3-6 axis s...
