Search results
Nema17 stepper motor with 1000 line rotary encoder
Nema17 stepper motor with incremental rotary encoder Nema17 40mm or 48mm hybrid stepper motor Holding torque: 0.4N.m or 0.44N.m 1000 line AB incremental rotary encoder
NEMA17 48mm reprap geared stepper motor
RepRap Geared StepperNema17 48mm body stepper motor Rated current: 1.68A Motor holding torque: 0.5N.m Planetary gear, ratio 5.18:1 The geared nema17 are widely used in applications, and popular is for RepRap 3D Printer Extruder. New arrival: G17-48-C5X30 and G1748-C19X30 It's suitable for Step Extru...
42HS40-1704 58 oz.in stepper motor
3D Printer Nema17 Stepper Motor Two phase hybrid stepper motor Step angle: 1.8 degree nema17 40mm long body high torque stepper motor Rated current: 1.7A Motor Shaft: diameter 5mm, 24mm total length, 20mm long flat. Black n Green is one phase, Red n Blue is one phase. Holding torque: 4.2Kg.cm ...
12V 0.1A graphic card cooling fan
Graphic card cooling fan Brushless DC Fan 12V 0.1A Frameless 3000RPM Suitable for 5.5CM(R1 and S2), 5.5-6CM(Rooster3) or 8CM(R4) mounting holes graphic card cooling Aluminum heatsink anodized Cooling fan for graphic card Square Mounting Hole Distance 55mm Connector 2-pin 2.54mm Rated Voltage 12V Rat...
Double sided PE foam self-adhesive tape
PE Foam Self-adhesive Tape Base material: PE Foam Type: Double sided Width and Thickness: 20mm wide 1mm thick, 40mm wide 1mm thick Length: around 10 meters per roll
M5 or M3 Slim Pre-Assembly T Nut for 2020 Aluminum Profile
M5 or M3 Slim Economy Pre-Assembly T Nut Material: Zinc plated carbon steel Thread Size: M5 Suitable for Openbuilds V-Slot, 80/20 20 Series, Openbuilds C-Beam, T Slot, Misumi HFS5 Series OR China Made 2020 Aluminum Extrusion Profiles ,etc. Package List: 100 x M5 Slim Pre-Assembly T Nut...
Robocults integrated stepper motor with driver
Integrated Stepper Motor with Driver Nema17 Integrated Stepper Motor 12 to 32 VDC Voltage Input 0.4A to 2A per phase support Full/Half/Quarter/16/32/64/128 microstep Idle current setting 0 to full load ajustable Common cathode, common anode, differential, one clock pulse/direction, double pulse CW/C...
900M welding iron tip for 936, 937 or 907 soldering station
900M Soldering Iron Tips If you need other model number which is not listed, please leave us message when ordering. Life: 5-15K solder joints longer than ordinary soldering iron Use: All 936 electric soldering iron Note: The larger the tip, the greater the heat capacity, the smaller the tip, the sma...
Alu handwheel with 200 reading label
Hand wheel for ball screw linear module Material: aluminum Diameter: 63.5mm Bore: 10mm 200 reading label per revolution simulation for full step mode stepper motor To position using manual control method by handwheel on CNC machines.
Robocults ball screw n smooth rod linear module
Ball screw and smooth rod drive linear module Nema17 48mm or Nema23 56mm stepper motor 1204 or 1605 ball screw 2080 80mm wide aluminum profile base plate 12mm smooth rod or linear shaft DUAL Ball screw nut carriage, rigid coupling To build a Modular 3D Printer or CNC Router. New arrival width 90mm w...
Low profile 2GT Pulley 60, 72, 120 tooth for 9mm belt
2GT Pulley for 9mm wide GT2 Belt Tooth profile: GT2 Pitch: 2mm Tooth number: 60 or 72 Bore diameter: 5mm, 6.35mm or 8mm Material: aluminum, the flange is zinc-plated steel. 65, 70, 80, 90, 100, and 110 tooth 2mm pitch 2GT pulleys are available upon request....
Low profile 2GT 30, 32, 36, 40 tooth pulley for 9mm wide belt
2GT Pulley for 9mm wide GT2 Belt Tooth profile: GT2 Pitch: 2mm Tooth number: 30, 32, 36 or 40 Bore diameter: 5mm, 6.35mm or 8mm Material: aluminum, flange is zinc plated steel....
Digital Display Hot Air Desoldering SMD Rework Station
Hot Air SMD Desoldering Rework Station Imported heating core, used in the electronics industry, anti-only cooling system, electrostatic design, Built-in Hall sensor, turbine principle, strong wind Advantage: Using the sensor closed loop temperature control, heating up quickly, set temperature is con...
42HS nema17 0.5N.m or 0.6N.m stepper motor
0.5N.m or 0.6N.m Nema17 Stepper Motor Nema17 42HS48-2504, 42HS60-1704 Step angle: 1.8 degree, 200 steps Body length: 48mm, 60mm Rated current: 42HS48 2.5A, 42HS60 1.7A per phase Holding torque: 42HS48-2804 0.5N.m, 42HS60-1704 0.6N.m Lead wire: 700mm with XH4P connector Wiring diagram: Black n Green,...
