Search results
Aluminum Heatsink wide 14mm to 25mm
Aluminum heatsink size 14mm to 25mm Material: Aluminum Treatment: Black Anodized Size: 20*20*6mm (Size 8) Fin: 35 fins, size of each fin: 1*3*5mm New arrival: 14*14*10mm, 19*19*5mm, 20*20*6mm, 20*20*10mm or 22*22*10mm
Thermal Sink with 3M8810 13*13*7mm
Heatsink with heat-conducting glue tape for A4988 or DRV8825.Material: Aluminum Size:13*13*7mm
Heatsink w/ tape for Stepsticks
Heatsink with thermal tape for A4988 or DRV8825.Material: Aluminum Size:9*9*5mm Color: silver or black 3M Tape on the back...
Blue Tape for 3D Printing 48mm*30M
Blue Tape 48mm wide 30M roll for 3D Printing Masking.Constructure: surface activator/ crepe paper/ solvent rubber adhesive Applications: In-door paint masking, Light duty packaging, bundling, holding, splicing & Tabbing, and other non-critical applications where a pressure-sensitive tape is need...
Thermal Sink for Nema17 Stepper
Industrial grade heatsink for nema17 stepper Heatsink for Stepextruder, thermal sink for electronics. Overall Size: 42*40*15mm Fin Size: 1.2*8.5*13mm Material: Aluminum Two holes for stepper motor and 1 center hole for rear shaft of Nema17 stepper...
Mounting plate for Metal-J hotend
CNC machined anodized mounting plate for V5 sink Metal-J Hotend. It's for XYZ 3d printers and good for direct drive using metal-j hotend. Note: It's Not designed to work with end effector of Kossel. V6 is without sink How to set the hotend onto end effector of Kossel please refer to the following: h...
Mounting plate for J-head Hotend
CNC machined anodized mounting plate for J-head Hotend V5 with sink area for E3D V5 Hotend V6 Flat for E3D V6 Hotend
LMS8UU Short Linear Bearing
8mm short linear bearing LM8SUU Linear Bearing Bearing rows: 4 Outer Diameter: 15mm Inner Diameter: 8mm Length: 17mm...
Damper pad for nema23 stepper motor
NEMA 23 stepper motor damper Suitable for 57 Stepper Motor Inner circle diameter: 23mm Thickness: 10mm Vibration suck using a stepper motor? The Stepper Motor Damper will help you to overcome the useless jig. Shock Absorber Stepper Vibration Damper for Nema23 Stepper Motor...
24 Tooth GT2 Pulley
Tooth Profile: GT2 Material: Aluminum Tooth Number:24 Pitch: 2mm Bore Diameter: 5mm or 6.35mm Gear Width: 5B-6 is 5mm bore for 6mm belt, 5B-9 n 6.35B-9 are 5mm n 6.35mm BORE for 9mm wide gt2 belt9mm wide pulley n belt available from RobotDigg 16 Tooth 5mm Bore Pulley 20 Tooth 5mm Bore Pulley 24 Toot...
MK8 Thermal Barrier Tube
Thermal tube for 3d printer hotendsInside diameter: 2.4mm Outside diameter: 6mm Mounting thread: M6 The total length: 23mm Built-in PTFE Insulation Tube for 1.75mm Filament. New arrival, No PTFE Liner MK8TUBE20 for high temperature, inside diameter 2.0mm....
Cotton Fiber Heat Insulation
Laser Cutting Insulation Cotton FiberSize:66*50mm Thickness:3mm...
Light Bulldog Extruder
Light Bulldog Extruder 1.75mm and 3mm Filament Compatible Including: 1pc X 1pc 17HS5005-20B Nema17 48mm Stepper Motor 1pc X Bulldog Extruder Head Metal 1pc X Drive Gear for 5mm Shaft 1pc X PC4-M6 Connector for 1.75mm Filament 1pc X PC6-M6 Connector for 3mm Filament
PTFE Tube for Peek Isolator of J-head Hotend
Machined PTFE Tube for PEEK Isolator of J-head Hotend. Size: ID2mm OD6mm L22mm for 1.75mm filament to be through....
