Search results

Integrated Hotend w/ Heater Block

M7 Threaded Thermal Tube, 0.4mm Nozzle Integrated. Heater Block included. Compatible with E3D-V6, E3D Chimera, E3DCyclops

UM2 Integrated Nozzle

Integrated Nozzle UM2 Compatible with Ultimaker 2, Nozzle, Heater Block n short Thermal Tube Here is only the nozzles size 1.75mm filament 0.3mm, 0.4mm, 0.6mm or 0.8mm...

M7 thread screw thermal tube, nozzle, heater block n drive gear for Flashforge

M7 Threaded Screw 3D Printing Nozzle It's compatible with Flashforge MK10 Nozzle When printing 1.75mm filament, PTFE Tube is preferred, please buy separately. Stainless Steel M7 threaded Nozzle 1.75mm 0.4 n 0.6 available. Thermal tube for flashforge, M7 threaded and can past through 4mm OD PTFE Tube...

2Pin Jumper Wires 300mm, 700mm or 1300mm

700mm jumper wires for reprap project 2 pin black n red 22AWG lead wires. Both end female dupont connector. New supplies 300mm, 1300mm length 2Pin lead wires with black dupont connectors.

180mm Kossel Printing Plate

Stainless Steel Machined Printing Plate One face mirror-polished It can be used as printing plate, if No heater pad is needed.

180mm Kossel top or bottom plate

Stainless Steel Machined Top or Bottom Plate for Kossel Material: Stainless Steel One face mirror polished Used for 180mm printing area Kossel or Rostock 3d printers. 2 units in stock and out of production.

36v 180w or 360w, 48v 400w or 600w switching power supply

S-400-48 48VDC Power Supply Output Voltage:48V Output Type Single Channel Input Voltage:110V/230VAC(selected by switch) Output amps 8.3A DC Output Power:400W Weight:1.2kgs Dimension:215*115*50mm Convert AC input selected by switch Overload protection: 105%-135% Shut off current,automatically restore...

440C SUS MGN9C, MGN9H, MGN12C or MGN12H linear rail Carriage

Carriage for Linear Rails MGN9, MGN12, MGN15 Important Note: To have a better performance, the carriage is pre-assembled onto linear rails other than purchasing separately. Please buy together with the 440C stainless steel linear rails if you need more than 1 carriage per rail to Set the preload upf...

SK20 Linear Shaft Support

SK20 Linear Shaft Support Unit Length: 60mm Height: 61mm Thickness: 20mm For 20mm Linear Shaft...

SK16 smooth rod support

16mm Linear Rod End Support Length: 48mm Height: 44mm Thickness: 16mm Bore: 16mm...

Volume flow rate dc motor or stepper peristaltic pump

Motorized peristaltic pump ◆ flow range: 0-400ml/min (pump tubing: diameter 6.8mm outer diameter of 10mm) ◆ Applicable Tubing: 1.6mm wall thickness tubing, the maximum outer diameter of 10mm, the standard pump tubing: diameter 6.8mm outer diameter of 10mm ◆ pump cover hand twist screws, easy accessi...