Search results
KSD9700 Bimetal Temperature Control Switch Normal Open Thermostat
KSD9700 Normal Open Thermostat Material: Metal case Contact: NO(Normal Open) Temperature: 100°C~150°C Rated Power: 250V 5A Lead Wire Length: 7.3cm / 2.9" Head Dimension: 20 x 7.5 x 3.5mm/0.78" x 0.3" x 0.14"(L*W*T)...
Peristaltic pump glue dispenser for epoxy resin glue
MT-410 semi-automatic peristaltic pump glue dispensing machine Standard equipment with manual dispensing switch Built-in high-precision potentiometer, dispensing time can be adjusted Standard equipment to prevent leakage of vacuum institutions Available manual (MAN) / quantitative (TIME) two modes o...
RD-140GS medium duty linear module
Ball screw and SBR rail linear actuator 2005 or 2010 ball screw 800mm or 1000mm working length Two pieces SBR20 linear rails and 4 units of SBR20 blocks Stepper motor or servo motor is Not included. Repeating accuracy suppose to be +-0.02mm...
Ball screw n linear rail with anti-dust cover linear actuator
Anti-dust linear module or linear actuator Note: Stepper motor, and servo motor need to purchase separately. RD95S 300mm, 400mm, 500mm working length linear module 1605, and 1610 ball screw options are in stock, and 1616 or 1620 customized options are on request. HGR15 linear rail single piece, the ...
440C SUS Square Flange Linear Bearing
440C Stainless Steel Frame and Ball Bearing LMK8UU, LMK10UU, LMK12UU, LMK16UU, LMK20UU, Nylon Retainer. SUS304 is austenitic stainless steel with good plasticity and good cold workability. At the same time, due to its austenitic structure, it is non-magnetic and cannot be adsorbed by magnets. It is ...
440C SUS Round Flange Linear Bearing
Stainless Steel Linear Bearing 440C Stainless Steel Frame and Ball Bearing LMF8UU, LMF10UU, LMF12UU, LMF16UU, LMF20UU, Nylon Retainer. SUS304 is austenitic stainless steel with good plasticity and good cold workability. At the same time, due to its austenitic structure, it is non-magnetic and cannot...
440C Stainless Steel long type linear shaft bearing
440C Stainless Steel Frame and Ball Bearing LM8LUU, LM10LUU, LM12LUU, LM16LUU, LM20LUU, Nylon Retainer. 440C SUS retainer, frame and ball bearings LM8GA, LM10LGA, LM12LGA, LM16LGA, LM20LGA. SUS304 is austenitic stainless steel with good plasticity and good cold workability. At the same time, due to ...
440C Stainless Steel standard type linear shaft bearing
SUS304 is austenitic stainless steel with good plasticity and good cold workability. At the same time, due to its austenitic structure, it is non-magnetic and cannot be adsorbed by magnets. It is difficult to increase its strength by heat treatment, and its corrosion resistance is superior. SUS440C ...
300G Automatic Material Feeding Machine Auto Loader
Vertical Material Feeding Machine for Hopper Dryer 300G Automatic Material Feeding Machine Vacuum Feeder Auto Loader 220V Description: - It conveys plastic granules to the injection mold machine with ease. It is easy to operate and its filter system makes it possible to be used for a long time. An i...
NEMA23 Captive Linear Stepper Motor
Captive NEMA23 Stepper Motor Linear Actuator NEMA23 Captive Shaft Lead Screw Stepper Motor Linear Actuator. 2 phase bipolar NEMA23 56mm length body stepper motor Step angle 1.8 degree, 200 steps per revolution. Rated current 3A, 12-48V DC wide range power supply. Resistance per phase 1.1 Ohm+-10%, i...
Ball Screw Support Unit EK15 n EF15, EK20 n EF20
EK15 n EF15, EK20 n EF20 ball screw support unit How should I machine the Ball Screw to fit the Support Units? Machine Ends for Fixed Side Machine Ends for Floated Side...
Ball Screw Support Unit FK n FF for diameter above 20mm
FK15 n FF15, FK20 n FF20, FK25 n FF25, FK30 n FF30 Support units of ball screw can be divided into fixed side and floated side. Fixed side support units are available in three series BK, FK and EK, floated side are correspondingly referred in three types BF, FF and EF. There are applicable ball scre...
Robot Arm six degrees of freedom 6 DOF RoboSEED
6 DOF Robot Arm SCARA or six degrees of freedom Robot Arm 24V DC power supply energy saving No need for a control box that is Movable on AGV Power servo motor，electricity：1.5A Payload rated load: 1Kg Max load: 2Kgs Moving Range JS(Rotary） -160°~ + 160° JL(Upper Arm) -90°~ + 110° JU(Lower Arm) -0°~ +...
Desktop DIY Violet Picture CNC Laser Printer Kit
DIY Laser Engraver Desktop DIY Violet Laser Engraving Machine Picture CNC Printer, working area 40cmx30cm Note: it's Not assembled but 3040 cnc laser engraver kit, 2 AXIS Details: 1, the maximum engraving area of 40 * 30CM 2, mobile gantry table sculpture, carved objects does not limit the size of t...
