Search results
HD12 HD16 HD20 HD25 HD32 ball screw nut housing or block
Ball Screw Nut Seat HD12 (outside diameter 22.1 and 24.1) HD16 HD20 HD25 HD32 are available as request. Suitable for ball screw SFU1204/1604/1605/1610/2004/2005/2010/3205/3210 Material: high quality aluminum alloy Hole with wire cutting to ensure error-free accurate Surface treatment: Surface grindi...
RC Servo 25T spinle couple GT2 pulley
RC Servo GT2 Pulley GT2 Pulley 20, 36 tooth to couple with RC Servo 25T spline Material: aluminum Tooth profile: 2GT or GT2 Pitch 2mm Used for 6mm wide belt. RC Servo is Not included. RC Servo especially coreless motor servos can be widely used in small devices of medical or analysis. As the positiv...
GM20BY pm stepper motor with planetary gear
GM20BY geared pm stepper motor Motor type: PM Stepper Motor Accessory: Planetary gearbox Spec.D*L(mm): 20.0×18.5 OD(mm): 20.0 Length(mm): 18.5 Shaft diameter(mm): 4.0 Voltage(V): 5-12 VDC Current(A): 100mA 5VDC, 600mA 12VDC Reduction Ratio: 100:1 Gearbox length(mm): 17.4 Number of phases: 2 Step ang...
Micro DC plastic planetary Geared Motor
10GP-M10 micro geared motor - Rated Voltage: DC 3V - Gear Ratio: 1/171 - Rotation: CW & CCW - Motor Position: All position in horizontal - Working Temperature: 0 - 30 ℃ - Working Humidity: 30% ~ 95% - Output Speed: 60±10% RPM - No-load Current: 60mA (Max) - Stall Current: 250mA (Max) - Stall Tor...
GM15BY micro pm stepper motor and linear stepper
Micro Gear PM Stepper Motor 1: 12 * 10mm gearbox with GM15BY stepper motor 2: meet the EU environmental standards. Low energy consumption. Low noise 3: After the stepper motor is slowed down, further subdivide the step angle to increase the load torque. 4: Reduction ratio: 1: 50 5: The product is su...
Compact 3D Vision Inspection and Imaging Machine
3D Vision Inspection Machine It's a compact desktop 3D vision inspection and imaging machine that it adopts industrial camera details below. Based on Intel Atom Z8300 (1.44-1.83GHZ) quad-core processor, it supports 360,000 to 10 million pixels, and is fully compatible with GE, UB, and SUB camera API...
PLA polylactic acid or polylactide
PLA takes annually renewable resources – corn, cassava and other plants as raw material. After fermentation by microorganisms, lactic acid will be extracted, then PLA will be produced through a process of refining, dehydration polymerization, high temperature pyrolysis and final polymerization. PLA ...
Pneumatic printed circuit board testing jig Test Fixture
Pneumatic PCB Test Fixture This test way means PCB are tested by Fixture testing machine. Time is short for 1 PCS or panel,always in 5-10 sec. But need to make a test fixture for each kind PCB. It is not economical for PCB prototype,so, Fix tooling testing is suitable for Mass production order. PCB ...
PCB testing jig PCBA test fixture
PCB Test Fixture Pneumatic PCB E-test Fixture please click the link. Note: the test rack of each model contains the corresponding ABC board, such as FC80X50X42, which contains 80X50X42ABC board.If you need to purchase ABC board separately, please contact customer service to purchase it. Model descri...
32-bit ARM open source control board MKS SBASE V1.6
MKS SBASE V1.3 32bit control board MKS SBASE is a latest motherboard for 3D Printer, designed by Makserbase (MKS) compatible both Marlin and Smoothieware. It is based on ARM platform and uses 32bit 100M Cortex-MS MCU-LPC1768. From MKS SBASE V1.2 1.Fix temperature problem. 2.Add thermocouple Pins( ca...
MKS Smoother module 3d printer components diode board stepstick filter
MKS Smoother Stepstick Filter Packing List 1pcs* MKS Smoother 1pcs* 4pin cable This Smoother controller helps to smooth seismic lines which create by stepper motor. Especially on DRV8825 driver. Before After usage of the MKS Smoother...
NEMA17 30mm body stepper motor for DyzeXtruder
NEMA17 30mm length body for DyzeXtruder Step angle: 1.8 degree Rated voltage: 3.36V Two phase bipolar, rated current 1.2A Resistance per phase 2.8 Ohms Inductance per phase 3.5mH+-20% Holding torque 240mN.m The motor is chosen to match the maximum torque tolerated by filaments. The motor won't grind...
365nm wavelength UV Light Curing Box 7 or 14 inches
UV Light Curing Processing Box The main technical parameters: Dimensions: LD-1KW-7 Dimension: 280*250*220mm, ID 250*150*50mm LD-2KW-14 Dimension: ，ID 340*315*50mm Working voltage: 110V-220V UV optical power: 1000W or 2000W Weight: 6.5Kg or 10.5Kg Wavelength: 365NM Lamp life: 8000-10000 hours This de...
3.6MP USB Electronic Microscope with OLED screen for PCB repair
Electronic Microscope for PCB Repair Main parameters: 1: Pixel: HD 3 .6MP CCD 2: Display: 4.3 inches HD OLED display. 4: Magnification: 1-600X continuous magnification system. 5: Object distance: 15mm-- infinity. 6: With built-in lithium battery, Continuous working for 6 hours. 7: Languages: English...
