Search results
3/8 inches 9.5mm Steel Balls
3/8 inches Steel Balls. 9.5mm 3/8 inches chrome steel bearing balls are the exact size you need for your Rostock or other Delta Robot 3D Printers. Since 1st March 2015, the ball is 304 stainless steel. The price marked is for 50pcs in U.S. Dollars....
3 or 4 Inches Putty Knife
3 or 4 Inches Putty Knife You may need one of this kind Putty Knife to take off mild pieces from the hot bed of the 3d printer and to clean print area or the heated bed. Note: Even though the 4 inches Putty Knife seems like a fan and not that sharp, but please DO NOT take it as a fan in this hot sum...
Utility Knife
EZ3D Utility Knife Off-shelfHeavy Duty Utility Knife for multi-task jobs. This Utility Knife has 2pcs backup blades in it is built-in storage, easy to change the blade. Note: It is a handy utility knife but DO NOT get your children touch it, it is a bit too heavy for them....
Nema8 Hollow Shaft Stepper Motor
Nema8 size 20mm hollow shaft stepper motor 8HY0001-7SK 5mm Shaft, 2.5mm hollow standard offer. New arrival, rear shaft Nipple End. The new design is considered for tube mounting on the rear shaft of PnP Head 1-19pcs 19USD/pc 20pcs above 16USD/pc Application: Pickup Head http://www.vbesmens.de/en/pic...
LM6UU Linear Bearing
LM6UU Linear Bearing LM6UU is another Linear Bearing after our supply of LM8UU Linear Bearing. LM6UU is for 6mm Smooth Rod. 6mm, 8mm and 10mm Smooth Rod and Linear Bearing is widely used in Repraps. Model: LM6UU Shaft ID: 6mm Shaft OD: 12mm Shaft Length: 19mm Number of ball rows: 4 Material: Bearing...
Timing Belt Tensioner Spring
Timing Belt Tensioner Spring Nickel-plated, better quality than Zinc-plated. RobotDigg try to help users to tense the timing belt, Timing Belt Idler can help but for Open Ended GT2 Belt, low force high accuracy requirement, Timing Belt Tensioner Spring is one of the best choice and cost performance....
Timing Belt Idler F608ZZ Flanged Ball Bearing
Timing Belt Idler RobotDigg take this Rostock Timing Belt Idler as our standard offer. F608ZZ flanged ball bearing size 8*22*7 are good choice for our 6mm or 6.35mm Timing Belt....
Threaded Rod Nema17 Stepper with Tr8*12 Lead Screw
Threaded Rod Nema17 Stepper with Acme Leadscrew Order No. 17HS3001-460N812 Tr8*12 Leadscrew, 2mm Pitch, 6 Starts. The resolution is the same with Tr8*8 Leadscrew but for much higher speed request. You can write us email for CUSTOM length up to 600mm long for Z18 alike large 3d printers. The body of ...
96mm, 98mm, 100mm or 102mm 2GT closed-loop belt
GT2 Belt, Closed-loop, 102mm length, 51 teeth, 6mm width Tooth Profile: GT2 or 2GT Round Profile Material: NeopreneRubber with Fiberglass Reinforced Color: Black Pitch: 2mm Tooth Number: 49 or 51 Length: 98mm or 102mm Width: 6mm or 9mm Type: Closed-loop Quantity: 1 piece New supply 96mm pitch length...
Nema17 size stepextruder heatsink
Nema17 Size Stepextruder Heatsink Size: 42*42*12mm Material: Aluminium Surface treatment: Anodized Black or Golden SEHeatsink17: Basic NEMA 17 heatsink with hole in the middle and 2 mounting holes drilled, pic #1. SEHeatsink4: Same as above, but 4 mounting holes at all 4 corners instead of 2, pic #2...
MK7 or MK8 extruder Aluminum Thermal Core
MK7 Aluminum Thermal Core The thermal core heater block is a brushed nickel finish surface. And the quality is improved a bit. Order after 20th, August 2013, all Thermal Core from us are the new better quality ones....
Kapton Tape 5mm to 300mm width
Kapton Tape Features: 1. One-side adhesive. 2. It's with good performance of adhesive, docile and obedient, solvent resist, no infiltrating solder, no glue rest. 3. Widely used for phone batteries packing, coil insulation and high temperature masking, gold finger protect when PCB SMT soldering. 4. H...
MK7 Stainless Steel Thermal Barrier Tube
NEW Design MK7 Stainless Steel Thermal Barrier Tube With an inner diameter of 2mm, this Barrel is widely applied in many 3d printers. Taper-type opening for easily getting in.
MK8 0.4mm, 0.6mm or 0.8mm Nozzle
MK8 0.4mm NozzleHot End part: Brass Nozzle latest version MK8 for 1.75mm filament, 0.4mm nozzle. It's the best Nozzle Made in China. It's mirror polished inside the nozzle to reduce jam during printing.Do you know? It's time for you to replace your MK7 Extruder with MK8 0.4mm Nozzle. The above photo...
