Open Ended 6mm Width GT2 Belt



Chat Online

Open Ended 6mm wide GT2 Belt

The GT2 Belt is 2mm pitch, 6mm width, the order increment is 1M, 1.8USD/M for any order below 50M.
GT2 belt

Open ended 5M, 10M or 50M per roll were put in stock for quick response.
That means if 25 meters are ordered, you will receive 10 meters a roll of 2 and 1 of 5 meters roll gt2 belt. If you need 25 meters as one roll, please leave a message following your order, thanks.
Material of Neoprene Rubber, Fiberglass Reinforced is perfect for all types of 3D Printers and other automation requests.

RobotDigg offers a 6mm width and also a 9mm width open-end gt2 belt.

Besides, Endless or Closed Loop GT2 Timing Belt, 102mm, 202mm(101 teeth), 610mm(79 teeth), 760mm(94 teeth), 1524mm and other 20 more lengths are available.

Do you know?
The GT2 6mm width open end Belt and GT2 20 Teeth Pulley combination is the best of the possible belt&pulley combo for all  MendleMax and all Reprap variant 3D Printers. And it is less prone to backlash due to the way the rounded teeth mesh up. Square toothed belts and pulleys just always seem to have that little bit of play that is impossible to calibrate out of your printer. Our GT2 pulleys and belts are the best choice for very precise positioning. Simply swapping out your square tooth belts and pulleys for these GT2 profile belts and pulleys is a VERY cost-effective way to upgrade your 3D printer and improve print quality! The GT2 round tooth belt is also quieter than square toothed designs. Other than replacing your belts entirely with our Threaded Rod Nema17 Steppers and Anti-Backlash Nut there is no better 3D printer option than these belts and our Pulley.

Kevlar-reinforced 2GT belt is much more expensive than fiberglass reinforced. Over 90% of the China-made small-pitch rubber timing belts are fiberglass reinforced.

You may also like...